Manufacturer: Pro-Tech shop

The straight grinder with a power of 1500 W and a collet of 6 mm is ideal for engraving, grinding, milling etc. The grinder is equipped with speed co

The car charger with a charging current of 20 A is designed for charging batteries with a voltage of 12/24 V. The charger is equipped with an ammeter

The car charger with a charging current of 45 A is designed for charging batteries with a voltage of 12/24 V. It is applicable in every garage, works

The assembly trolley contains 5 smaller and 2 larger drawers, a cabinet and 250 pieces of tools. The tools are stored in inserts. In the upper part there is an organizer for storing spare parts.

The Caliper Micrometer is a measuring device with a measuring range of 25 - 50 mm and uses a micrometric screw with an accuracy of 0.01 mm. This make

Riveting pliers with a lever 320 mm long are used for riveting rivets made of aluminum, copper, steel, and stainless steel with replaceable jaws in t

The silicone gun is made of steel sheet. It is used for extruding chemical anchor from the cartridge. Technical data: Length: 215 mm Width: 60 mm

Starter cables with a length of 2.5 m are intended for emergency starting of a vehicle with a maximum starting current of 600 A. The cables are made

Starter cables 2.4 m in length are intended for emergency starting of a vehicle with a maximum starting current of 100 A. The cables are made of copp

Starter cables 3 m in length are intended for emergency starting of a vehicle with a maximum starting current of 300 A. The cables are made of copper

The starter trolley with a maximum starting current of 320 A and a charging voltage of 12/24 V is equipped with an ammeter and fuses that protect the

The workshop lamp with 6 diodes contains a battery with a capacity of 1200 mAh. The lamp can be attached from the bottom with a magnet and a clip loc

The brush cutter with a motor power of 1,8 kW is designed for trimming bushes, but can also handle dense grass. It includes a 2-stroke air-cooled eng

The 1.5 kW electric motor is designed for a single-phase system 1 x 230 V (50 Hz) and is equipped with a pulley. Electric motors are used for driving

Adapter that transforms a brushcutter into a cultivator. The cultivator has 4 blades and is suitable for brushcutters with a shaft tube diameter of 2

The motorized vibrating plate weighing 110kg is used for compacting bulk materials such as sand, gravel, soil, for sidewalk repairs, roads, engineeri

The stand is designed for storing 4 seasonal tires with rims stacked on top of each other. The advantage of such storage is that it prevents tire def

The hydraulic gearbox lifter is designed for the assembly, disassembly, and repair of the gearbox. The maximum load capacity is 1000 kg, the low cons

The orange car beacon is intended for accompanying vehicles and can be attached to the hood with a magnet. The beacon is powered from the vehicle's s