Manufacturer: Pro-Tech shop
Combination pliers with an overall length of 115 mm have a rubberized handle for a secure grip during work and are equipped with a cutting jaw.
Combination pliers 115mm 09546
Availability
This product is currently not available.
Usually ships in: 7-14 days
2,70 GBP
Side cutting pliers for wire, made of carbon steel with a total length of 115 mm. For better grip, the handles are covered with plastic caps.
Pliers Mini Side Cutting Pliers 115mm 09549
Availability
This product is currently not available.
Usually ships in: 7-14 days
2,80 GBP
The cordless impact wrench belongs to the family of Geko One Power System cordless tools and is powered by 18 V batteries. The wrench has a torque of 400 Nm and is designed for 1/2" socket wrenches. Its advantage is the brushless motor, which can work under higher load and has a longer lifespan.
Cordless Impact Wrench 18V 1/2" 400Nm Geko One Power 09561
Availability
This product is currently not available.
Usually ships in: Out of stock
55,80 GBP
Rubberized work gloves 9” BLUE are suitable for cold environments thanks to their thick design, such as outdoor warehouses or open garages. The work gloves are rubberized by dipping and made with seamless technology with an elastic cuff at the wrist.
Thermal Work Gloves 9” BLUE 09569
Availability
This product is currently not available.
Usually ships in: 7-14 days
1,26 GBP
Rubberized 10" ORANGE work gloves are suitable for cold environments such as outdoor warehouses or open garages due to their thick construction. The work gloves are rubberized by dipping and made with seamless technology with an elastic cuff at the wrist.
Insulated Work Gloves 10" ORANGE 09573
Availability
This product is currently not available.
Usually ships in: 7-14 days
1,44 GBP
Rubberized 10" GREEN work gloves are suitable for cold environments such as outdoor warehouses or open garages due to their thick construction. The work gloves are rubberized by dipping and made using seamless technology with an elastic knit at the wrist.
Insulated Work Gloves 10" GREEN 09576
Availability
This product is currently not available.
Usually ships in: 7-14 days
1,44 GBP
The hand saw for aerated concrete with a total length of 600 mm has 32 teeth, of which 16 are carbide. The aerated concrete saw is designed for precise cutting of building materials, made of manganese steel 65 Mn and coated with a Teflon layer. The saw has an ergonomic handle made of ABS plastic.
Hand saw for aerated concrete 600 mm 32/16 teeth 09578
Availability
This product is currently not available.
Usually ships in: 7-14 days
13,50 GBP
The rubber pad is designed for vibrating plates up to 80 kg in weight. Mounting screws are included in the package. Technical data: Dimensions: 56
Rubber pad for vibrating plate 56x47cm C80 10181
Availability
This product is currently not available.
Usually ships in: 7-14 days
23,40 GBP
Universal saw blade with a diameter of 210 mm for cutting soft and hard wood, chipboards, and carpentry products. The blade is made from heat and def
Saw blade 210mm 20T 32mm 10222
Availability
This product is currently not available.
Usually ships in: 7-14 days
9,90 GBP
Universal saw blade with a diameter of 210 mm for cutting soft and hard wood, chipboards, and carpentry products. The blade is made of heat-resistant
Saw blade 210mm 24T 32mm 10223
Availability
This product is currently not available.
Usually ships in: 7-14 days
4,42 GBP
Universal saw blade with a diameter of 210 mm for cutting soft and hard wood, chipboard, and carpentry products. The blade is made of steel resistant
Saw blade 210mm 36T 32mm 10225
Availability
This product is currently not available.
Usually ships in: Out of stock
5,04 GBP
Phillips screwdriver size PH2 with a working length of 150 mm is designed for tightening and loosening screws with a crosshead. The screwdriver has a rubber handle for better grip during work.
Phillips Screwdriver PH2 150mm 09594
Availability
This product is currently not available.
Usually ships in: Out of stock
1,80 GBP
The Phillips cross screwdriver size PH2 with a working length of 38 mm is designed for tightening and loosening screws with a cross head. The screwdriver has a rubberized handle for greater grip security during work.
Cross Screwdriver PH2 38mm 09596
Availability
This product is currently not available.
Usually ships in: 7-14 days
1,80 GBP
The Philips cross screwdriver size PH1 with a working length of 200 mm is designed for tightening and loosening screws with a cross head. The screwdriver has a rubberized handle for a more secure grip during work.
Philips Cross Screwdriver PH1 200mm 09597
Availability
This product is currently not available.
Usually ships in: Out of stock
1,80 GBP
The Philips PH2 cross screwdriver with a working length of 400 mm is designed for tightening and loosening screws with a cross head. The screwdriver has a rubberized handle for a more secure grip during work.
Philips Screwdriver PH2 400mm 09603
Availability
This product is currently not available.
Usually ships in: Out of stock
2,62 GBP
The Phillips screwdriver size PH0 with a working length of 300 mm is designed for tightening and loosening screws with a cross head. The screwdriver has a rubberized handle for greater grip security during work.
Phillips Screwdriver PH0 300mm 09605
Availability
This product is currently not available.
Usually ships in: Out of stock
1,62 GBP
The Philips cross screwdriver PH2 size with a working length of 150 mm is designed for tightening and loosening screws with a cross head. The screwdriver has a rubberized handle for a more secure grip during work.
Philips Screwdriver PH2 150mm 09609
Availability
This product is currently not available.
Usually ships in: 7-14 days
2,26 GBP
The screwdriver with a hex bit is designed for screwing at a 90° angle, especially in hard-to-reach places. The screwdriver has a rubberized handle for better grip during work.
Angle Screwdriver HEX 09610
Availability
This product is currently not available.
Usually ships in: 7-14 days
2,70 GBP
Flat screwdriver with a tip width of 5 mm and a working length of 400 mm is designed for tightening and loosening screws with a flat head. The screwdriver has a rubberized handle for greater grip assurance during work.
Flat screwdriver 5x400mm 09611
Availability
This product is currently not available.
Usually ships in: Out of stock
2,70 GBP
Flat screwdriver with a 5 mm tip width and a working length of 300 mm is designed for tightening and loosening screws with a flat head. The screwdriver has a rubberized handle for greater grip assurance during work.
Flat screwdriver 5x300mm 09612
Availability
This product is currently not available.
Usually ships in: Out of stock
1,80 GBP
Flat screwdriver with a tip width of 4 mm and a working length of 400 mm is intended for tightening and loosening screws with a flat head. The screwdriver has a rubberized handle for better grip during work.
Flat Screwdriver 4x400mm 09613
Availability
This product is currently not available.
Usually ships in: Out of stock
2,16 GBP
The flathead screwdriver with a 3 mm tip width and a working length of 300 mm is designed for tightening and loosening screws with a flat head. The screwdriver has a rubberized handle for better grip during work.
Flathead Screwdriver 3x300mm 09614
Availability
This product is currently not available.
Usually ships in: Out of stock
1,36 GBP
Flat screwdriver with a tip width of 6 mm and a working length of 200 mm is intended for tightening and loosening screws with a flat head. The screwdriver has a rubberized handle for greater grip assurance during work.
Flat Screwdriver 6x200mm 09616
Availability
This product is currently not available.
Usually ships in: Out of stock
2,26 GBP
Flat screwdriver with a tip width of 6 mm and a working length of 150 mm is designed for tightening and loosening screws with a flat head. The screwdriver has a rubberized handle for greater grip security during work.
Flat Screwdriver 6x150mm 09617
Availability
This product is currently not available.
Usually ships in: 7-14 days
2,26 GBP
Flathead screwdriver with a 5 mm tip width and a working length of 200 mm is designed for tightening and loosening screws with a flat head. The screwdriver has a rubberized handle for better grip during work.
Flathead Screwdriver 5x200mm 09620
Availability
This product is currently not available.
Usually ships in: Out of stock
1,80 GBP
A flat screwdriver with a tip width of 5 mm and a working length of 150 mm is designed for tightening and loosening screws with a flat head. The screwdriver has a rubberized handle for a more secure grip during work.
Flat Screwdriver 5x150mm 09621
Availability
This product is currently not available.
Usually ships in: 7-14 days
2,44 GBP
A flat screwdriver with a 4mm tip width and a 100mm working length, designed for tightening and loosening screws with flat heads. The screwdriver has a rubberized handle for a more secure grip during work.
Flat Screwdriver 4x100mm 09623
Availability
This product is currently not available.
Usually ships in: 7-14 days
1,90 GBP
Flat screwdriver with a tip width of 4 mm and a working length of 75 mm is designed for tightening and loosening screws with a flat head. The screwdriver has a rubberized handle for a more secure grip during work.
Flat Screwdriver 4x75mm 09624
Availability
This product is currently not available.
Usually ships in: 7-14 days
1,80 GBP
Torx screwdriver with a tip size T6 and a working length of 75 mm is designed for tightening and loosening TORX screws. The screwdriver has a rubberized handle for greater grip certainty during work.
Torx Screwdriver T6 75mm 09626
Availability
This product is currently not available.
Usually ships in: 7-14 days
1,36 GBP
Torx screwdriver with tip size T20 and working length of 100 mm is designed for tightening and loosening TORX screws. The screwdriver has a rubberized handle for better grip during work.
Torx Screwdriver T20 100mm 09629
Availability
This product is currently not available.
Usually ships in: 7-14 days
1,54 GBP
The Torx screwdriver with T8 tip size and 75 mm working length is designed for tightening and loosening TORX screws. The screwdriver has a rubberized handle for greater grip security during work.
Torx Screwdriver T8 75mm 09631
Availability
This product is currently not available.
Usually ships in: 7-14 days
1,26 GBP
Torx screwdriver with a T7 tip size and a working length of 75 mm is designed for tightening and loosening TORX screws. The screwdriver has a rubberized handle for greater grip security during work.
Torx Screwdriver T7 75mm 09632
Availability
This product is currently not available.
Usually ships in: 7-14 days
1,26 GBP
Torx screwdriver with T6 tip size and 75 mm working length is designed for tightening and loosening TORX screws. The screwdriver has a rubberized handle for a more secure grip during work.
Torx Screwdriver T6 75mm 09633
Availability
This product is currently not available.
Usually ships in: 7-14 days
1,26 GBP
The set includes 6 flat and Phillips screwdrivers. The screwdrivers have rubber-covered handles for a more secure grip during work and are packed in a blister.
Set of Philips and Flat Screwdrivers 6pcs 09634
Availability
This product is currently not available.
Usually ships in: Out of stock
10,80 GBP
The screwdriver with interchangeable bits can be used both as a classic screwdriver and as a „T“ type screwdriver. The set contains 11 double-sided screwdriver bits of various types such as flat, Philips, Pozidrive, hex and torx. Thanks to the bits, it is possible to use one screwdriver instead of 22.
Screwdriver with interchangeable bits 12pcs 09635
Availability
This product is currently not available.
Usually ships in: Out of stock
13,96 GBP
Hand saw for wood with a cutting length of 400 mm is intended for work at home or in a carpentry workshop. The saw blade is covered with a Teflon layer and, thanks to the hardness of the teeth 50 - 54 HRC, it sharpens easily, the teeth are made of manganese steel. The ergonomic handle is made of plastic covered with rubber, which ensures a pleasant weight.
Hand saw for wood 400mm Teflon 09636
Availability
This product is currently not available.
Usually ships in: 7-14 days
6,30 GBP