Manufacturer: Pro-Tech shop

The 10-liter metal canister is intended for carrying gasoline, diesel, or oil. The canister is equipped with a handle for easier carrying. The cap has a metal seal preventing spillages of the transported liquid, and unwanted opening is further prevented by a cap lock.

Torx screwdriver with T5 tip size and 75 mm working length is designed for tightening and loosening TORX screws. The screwdriver features a rubberized handle for greater grip security during work.

The high-pressure cleaner with an engine power of 2000 W and a maximum pressure of 200 bar is the ideal device for cleaning all types of machinery an

Professional carpenter's axe weighing 2150 g and with a length of 805 mm. The composite body and the lower part with a non-slip Soft Grip coating ens

Handheld knife and axe sharpener that allows for optimum sharpening using ceramic sharpening stones. The sharpener is designed with ergonomics and sa

Electric motor with a power of 1.1 kW, a voltage of 230 V and an idling speed of 2810 rpm.

Electric motor with a power of 1.5 kW, a voltage of 230 V and an idling speed of 1400 rpm.

Electric motor with a power of 3.0 kW, a voltage of 230 V and an idling speed of 1430 rpm.

Electric motor with a power of 1.5 kW, a voltage of 230 V and an idling speed of 2840 rpm.

Electric motor with a power of 2.2 kW, a voltage of 230 V and an idling speed of 1420 rpm.

Electric motor with a power of 3.0 kW, a voltage of 230 V and an idling speed of 2840 rpm.

Electric motor with a power of 4.0 kW, a voltage of 230 V and an idling speed of 1440 rpm.

Electric motor with a power of 5.5 kW, a voltage of 230 V and an idling speed of 2850 rpm.

Complete engine block with a power of 6.5 hp and an output shaft of 20 mm in diameter. The engine is of OHV type Technical data: Engine power: 6.5

Replacement pulley for compressor Z2065 with an outer diameter of 26.5 cm and a hole diameter of 2.2 cm. The pulley also serves as a fan for cooling

A large, 94-piece socket set made of durable chrome-vanadium steel, housed in a practical plastic case. Contents of the package: Socket keys 1/2":

The pneumatic-hydraulic jack is designed for lifting vehicles along the vertical axis without tilts. The jack's hydraulics are activated using compre

This set of 8 forged socket wrenches is designed for a 1" square drive and is suitable for manual work as well as pneumatic impact wrenches. The so

The set of L-type torx wrenches is made from chrome-vanadium steel. Both ends are finishing with a torx with a hole. The handle is made of plastic an

The wheel brush for brushcutters with a diameter of 152 mm is designed for cleaning terraces, brick walls, and other surfaces of moss, dirt, and gra