Manufacturer: Pro-Tech shop

High-quality drum extension cable with a length of 40 m with 4 sockets. The cable is made of 3 copper conductors, each with a cross-section of 1.5 mm².

The microprocessor charger is a device for charging various types of 6V and 12V lead-acid batteries. It uses pulse-width modulation (PWM) technology for automatic battery charging in a 4-step charging cycle. The charger converts the current and voltage present in the network to a voltage that allows safe battery charging.

Two-arm bearing puller complemented by clamping screws to prevent puller from slipping off the bearing.

Two-arm bearing puller equipped with clamping screws to prevent the puller from slipping off the bearing.

Powerful compressor with accurate gauge and 12 V power supply. Designed for inflating tires and tubes with valves on cars, motorcycles, and bicycles, as well as mattresses, pontoons, balls. The ability to draw power directly from the car battery allows for pumping with greater performance than traditional compressors connected to the cigarette lighter socket.

An extension cable with 1 socket and a length of 10 m is used to connect household electrical appliances where you need to use electricity from a greater distance. The orange-colored cable is easily visible, so you won't accidentally run over it with a lawnmower or lose it in the grass.

Extension cable with 1 socket, 20 m long, used to connect household electrical appliances where you need to use electricity from a greater distance. The orange cable is highly visible, so you won't accidentally run over it with a lawnmower or lose it in the grass.

Extension cable with 1 socket with a length of 30 m is used for connecting household electrical appliances where you need to use electricity from a greater distance. The cable in orange color is well visible so you will not run over it with a lawnmower or lose it in the grass.

The extension cable with 1 socket and a length of 40 m is used to connect home electrical appliances in cases where you need to use electricity from a greater distance. The cable in orange color is highly visible so you won't accidentally run over it with a lawnmower or lose it in the grass.

The microprocessor charger is a device that allows charging various types of lead-acid batteries with a voltage of 12V and 24V. It uses pulse width modulation (PWM) technology for automatic charging of batteries in a 4-stage charging cycle.

The microprocessor charger is a device that enables charging various types of lead-acid batteries with a voltage of 16V / 8V /12V /14 V / 16 V / 24 V. It uses pulse width modulation (PWM) technology for automatic battery charging in a 4-stage charging cycle.

The electric drill sharpener provides quick and efficient sharpening of drill bits in sizes 3-13 mm.

Universal 12-piece set serves for pressing brake piston when changing brake pads.   Car Types: Citroen, Audi, Fiat, Alfa Romeo, Ford, Isuzu

Set for repairing damaged and stripped threads with classic pitch M5 - M12. Repair consists of drilling out the damaged thread and cutting a new thre

Wrench for mounting and dismounting lambda sensor with a diameter of 22 mm and a length of 31 mm. Technical data: Number of edges: 6 - edge Diamet

Hydraulic press with a working pressure of 8 tons, intended for pressing, forming in workshops, garages, agriculture, forestry, for craftsmen, in the

Glass suction cup with a maximum capacity of 40 kg and a diameter of 115 mm. Technical data: Size: 1x115 mm

The grate is intended for a gas stove. It serves to disperse the flame. It is an ideal helper if you are going to heat or cook something in a small p

Hydraulic press intended for pressing, pressing in workshops, garages, agriculture, forestry, for craftsmen and in industry. Technical data: P

Universal coiled spring compressor with a clamping range of 260 mm.

Double glass suction cup with a maximum load capacity of 80 kg and a diameter of 115 mm. Technical data: Size: 2x115 mm

Rotary pads for alignment with code 06359 with a load capacity of 680 kg/pc.

The set of hammers is intended for repairing small dents and smoothing out the bodywork. The working surfaces of the hammers and anvils allow achievi

A set of locking tools for setting the timing of Fiat, Opel, Ford, and Suzuki engines. Technical data: Engine: 1.3 CDTI/DDIS with chain timing, di

The puller allows the removal of secured steering studs without the need for sharp tools, thus preventing damage to the dismantled part. A very stron