Teflon spray PTFE 400ml STH501

PROPERTIES: 501 is a separating and lubricating spray based on PTFE (polytetrafluoroethylene), which reduces friction and decreases wear, free of oils and silicone. 501 has excellent adhesion to all materials. It very effectively repels dirt, dust, and impurities, is water-resistant. 501 has an excellent temperature resistance (-180 °C to +250 °C). 501 is suitable as a basic lubricant for guide devices, sliding surfaces, conveyor belts, transport rollers that are not under heavy load. 501 is an excellent replacement for silicone lubrication, everywhere where lubrication without grease and oil is needed.

APPLICATION AREAS: 501 is suitable as a basic lubricant for guide devices, sliding surfaces, conveyor belts, transport rollers that are not under heavy load. 501 is an excellent replacement for silicone lubrication, everywhere where lubrication without grease and oil is needed.

APPLICATION: Shake well before use. The surface must be dry, dust-free, and grease-free. Spray 501 onto the desired area in a thin layer and repeat after 2 minutes. Allow to dry thoroughly before loading.

TECHNICAL DATA: temperature resistance: -180°C to +250°C, Color: colorless.

CONTAINS: Hydrocarbons, C6-C7, n-alkanes, iso-alkanes, cyclic, <5% n-hexane propan-2-ol; isopropyl alcohol; isopropanol titanium tetrabutanolate. Extremely flammable aerosol. Container is pressurized: may burst if heated. Causes skin irritation. Causes serious eye damage. May cause drowsiness or dizziness. Harmful to aquatic life with long-lasting effects. Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking. Do not spray on an open flame or other ignition source. Do not pierce or burn, even after use. Do not breathe aerosol. Use only outdoors or in a well-ventilated area. Wear protective gloves/protective glasses/face protection.

IN CASE OF SKIN CONTACT: wash with plenty of water. If skin irritation occurs, seek medical advice/attention. In case of medical problems call TOXICOLOGICAL INFORMATION CENTER/doctor. AFTER INHALATION: Move person to fresh air and allow comfortable breathing. If skin irritation occurs, seek medical advice/attention.

IN CASE OF EYE CONTACT: Rinse eyes gently with water for several minutes. If wearing contact lenses and if it is feasible, remove them. Continue rinsing. Immediately call TOXICOLOGICAL INFORMATION CENTER/doctor. Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F. Keep out of reach of children. For professional use.